ABB ACQ580 Firmware Manual page 261

No. Name/Value
76.11 Pump status 1
Bit Name
0 Ready
1 CRC mismatch
2 Running
3...4 Reserved
5 In PFC control
6 In IPC control
7 Master enable
8 Active master
9...10 Reserved
11 Interlocked
12 Local mode
13 Reserved
14 Drive start active
15 Max stationary time elapsed 0 = False, 1 = True
0000h...FFFFh
76.12 Pump status 2
76.13 Pump status 3
76.14 Pump status 4
76.15 Pump status 5
76.16 Pump status 6
76.17 Pump status 7
76.18 Pump status 8
76.21 Multipump
configuration
Off
IPC
PFC
SPFC
Level control -
Emptying
Level control -
Filling
76.22 Multipump node
number
Description
Shows the status of pump or fan 1.
Value
0 = False, 1 = True
0 = False, 1 = True
0 = False, 1 = True
0 = False, 1 = True
0 = False, 1 = True
0 = False, 1 = True
0 = False, 1 = True
0 = False, 1 = True
0 = False, 1 = True
0 = False, 1 = True
Status of pump 1.
See parameter 76.11 Pump status
See parameter 76.11 Pump status
See parameter 76.11 Pump status
See parameter 76.11 Pump status
See parameter 76.11 Pump status
See parameter 76.11 Pump status
See parameter 76.11 Pump status
Selects the multipump mode.
PFC disabled.
IPC enabled. See Intelligent pump control (IPC)
PFC enabled. One pump at a time is controlled by the drive.
The remaining pumps are direct-on-line pumps that are
started and stopped by the drive logic
The frequency (group 28 Frequency reference
(group 22 Speed reference
defined as PID for the PFC functionality to work properly.
SPFC enabled. See section
page.64
Level control - Emptying is enabled.
See section Level control
Level control - Filling is enabled.
See section Level control
Node number of the drive on inverter-to-inverter link.
Note:
• Each drive on the link has a unique node number.
• If the drive is not given a priority class, the node number is
also used in determining the starting order of the pumps.
1.
1.
1.
1.
1.
1.
1.
on page 60.
chain) / speed
selection) reference must be
Soft pump control (SPFC)
on page 65.
on page 65.
Parameters 257
Def/FbEq16
-
1 = 1
-
-
-
-
-
-
-
Off
0
1
2
on 3
4
5
1