ABB ACQ580 Firmware Manual page 160

156 Parameters
No. Name/Value
PID
Frequency input
Control panel (ref
saved)
Control panel (ref
copied)
Level control
Other
Description
40.01 Process PID output actual
controller).
11.38 Freq in 1 actual value
input).
Panel reference (03.01 Panel
saved by the control system for the location where the control
returns is used as the reference.
Reference
Ext1 -> Ext2
Panel reference (03.01 Panel
the previous control location is used as the reference when
the control location changes if the references for the two
locations are of the same type (eg
frequency/speed/torque/PID); otherwise, the actual signal is
used as the new reference.
Reference
Ext1 -> Ext2
Parameter 76.07 LC speed ref
function).
Source selection (see Terms and abbreviations
(output of the process PID
(when DI5 is used as a frequency
reference, see page 106)
Ext1 reference
Ext2 reference
Active reference
Inactive reference
t
reference, see page 106) for
Ext1 reference
Ext2 reference
Active reference
Inactive reference
t
(output of the Level control
on page 100). -
Def/FbEq16
16
17
18
19
30