Yamaha XZ550RJ 1982 Owner's Manual page 225

1. Torque stopper
1. Reten de tension
I . Butee de serrage
Front wheel installation
When installing the front wheel, reverse the
removal procedure. Pay attention to the
following point:
1. Make sure the projection portion (torque
stopper) of the speedometer housing is
positioned correctly.
2. Make sure the axle nut is properly
torqued, and a new cotter pin installed.
3. Install the front fender .
4. Install the speedometer cable.
NOTE: _ _ _ _ _ _ _ _ _ _ _ _ _
Tighten the pinch bolt temporarily before
tightening the axle nut.
- 213 -