Toyota Avensis ZZT251 2003 Service And Repair Manual page 732

Seal Packing
A A
A
B
A
A
AVENSIS REPAIR MANUAL (RM1018E)
ENGINE MECHANICAL
18. INSTALL CYLINDER HEAD COVER SUB–ASSY
(a) Remove any old packing (FIPG) material.
(b) Apply seal packing to the 2 locations as shown in the il-
lustration.
Seal packing: Part No. 08826–00080 or equivalent
NOTICE:
S
Remove any oil from the contact surface.
S
Install the cylinder head cover within 3 minutes after
applying seal packing.
A62182
S
Do not expose the seal to engine oil 2 hours after
installing.
(c) Install the cylinder head cover and cable bracket with the
9 bolts, 2 seal washers and 2 nuts. Tighten the bolts and
A
nuts uniformly in the several steps.
Torque:
B
11 N m (112 kgf cm, 8 ft lbf) for A
9.0 N m (92 kgf cm, 80 in lbf) for B
A
A
A
A65687
19. INSTALL IGNITION COIL ASSY
(a) Install the 4 ignition coils with the 4 bolts.
Torque: 9.0 N m (92 kgf cm, 80 in. lbf)
A64023
http://vnx.su
– VALVE CLEARANCE (1ZZ–FE/3ZZ–FE)
14–17