Trunk Lid Panel - Subaru IMPREZA 2001 Service Manual

8. Trunk Lid Panel

A: REMOVAL
1. TRUNK LID
1) Open trunk lid.
2) Disconnect trunk lid connector.
3) Loosen trunk lid mounting bolts to remove trunk
lid from hinges.
2. TORSION BAR
1) Open trunk lid.
2) Using special tool, remove torsion bar from
hinge link.
ST 927780000 REMOVER
CAUTION:
During removal and installation, carefully han-
dle torsion bar. It will generate reactive force.
3) Remove right/left torsion bars.
CAUTION:
After the torsion bar is removed, the trunk lid
will slam shut. Be careful not to get hit by the
trunk lid.
TRUNK LID PANEL
B: INSTALLATION
1. TRUNK LID
1) Install in the reverse order of removal.
2) Install trunk lid with uniform clearance.
2. TORSION BAR
1) Install in the reverse order of removal.
2) Apply grease to rotating area of hinges and mat-
ing surface of torsion bar.
G5M0144
G5M0145
EB-17
EXTERIOR BODY PANELS