TRUNK LID PANEL
EXTERIOR BODY PANELS
8. Trunk Lid Panel
A: REMOVAL
1. TRUNK LID
1) Open trunk lid.
2) Disconnect trunk lid connector.
3) Loosen trunk lid mounting bolts to remove trunk
lid from hinges.
EB-00066
2. TORSION BAR
1) Open trunk lid.
2) Using special tool, remove torsion bar from
hinge link.
ST 927780000
REMOVER
CAUTION:
During removal and installation, carefully han-
dle torsion bar. It will generate reactive force.
ST
EB-00067
3) Remove right/left torsion bars.
B: INSTALLATION
1. TRUNK LID
1) Install in the reverse order of removal.
2) Install trunk lid with uniform clearance.
2. TORSION BAR
1) Install in the reverse order of removal.
2) Apply grease to rotating area of hinges and mat-
ing surface of torsion bar.
Tightening torque:
14 N·m (1.4 kgf-m, 10 ft-lb)
EB-17