Table of Contents
Advertisement
Spare Parts
Thermo Fisher Scientific
Preventive Maintenance
Chapter 5
The Model 5030 SHARP has been designed to operate unattended for a
period of up to one year. However, monitoring program requirements can
vary and sometimes depend upon the application and the regulations that
the sampling method must meet.
This chapter describes the periodic maintenance procedures that should be
performed on the Model 5030 SHARP to ensure proper, uninterrupted
operation. Certain components, such as the sample pump and filter tape,
have a limited life and should be checked on a regular basis and replaced as
necessary. Other procedures, such as annual optics and sample chamber
cleaning should be performed by a trained technician, and periodic checks
on the calibration of the pressure and temperature sensors should also be
performed. In this chapter, the specific checks and/or cleaning procedures
for these elements are reviewed.
Refer to the "Servicing" chapter for the component replacement procedures.
Table 5-1
lists the recommended spare parts.
Table 5-1. Recommended Spare Parts
Part Number
Description
FH111
Filter Tape Roll
FH153C14
Pump Repair Kit for FH180 and FH180-1 Pumps: includes
SM169001042 Set of 3 Carbon Vanes and KT144248920 Set of 2
PVC Separators
SM169001042
Set of Three Carbon Vanes for FH180, FH180-1 and 425452061
Pumps
KT144248920
Set of 2 PVC Separators for FH180 an FH180-1 Pumps
FH153-01
Pump Repair Kit for 425452061 Pump; includes SM169001042 Set
of 3 Carbon Vanes and KT144248920 Set of 2 PVC Separators
KT144248925
Set of 2 PVC Separators Only for 425452061 Pump
425452065
110-240V, 50/60Hz Vacuum Pump
KT169001023
Pump Repair Kit for 42542065 Pump; includes set of 5 Carbon
Vanes
KT169001024
Pump Protection Filter
Model 5030 SHARP Monitor Instruction Manual
5-1
Advertisement
Table of Contents
