Deleting Files; Copying Files; Transferring Data; Transferring Data To The Network - Husky Altanium Neo5 User Manual

6.1.4

Deleting Files

When a file or folder is no longer required on the internal hard drive, you can delete it.
1.
2.
3.
6.1.5

Copying Files

You can copy mold setups, images, or CSV files from one folder or device to another.
To copy and paste a file, do the following:
1.
2.
3.
6.1.6

Transferring Data

6.1.6.1 Transferring Data to the Network

Use the Mold Setup screen to transfer data to the network. When connected to the network,
the network folder structure appears by default in the right pane of the Mold Setup screen.

6.1.6.2 Transferring Data Using a USB Storage Device

You can transfer data using USB disks or USB CD-ROM drives. Select the USB button on the
Mold Setup screen. When a USB device is plugged into the USB port, the folder structure of
the USB device appears in the right pane of the Mold Setup screen. The folder structure
disappears when the device is unplugged. Follow the copy and paste steps to move files
from the USB device to the local hard drive, or from the local hard drive to the USB device.
Page 38
On the Mold Setup screen, touch the file or folder to be deleted.
Touch the Delete button.
A message appears asking to confirm the deletion. To continue, touch
the deletion, touch
On the Mold Setup screen, touch the file to be copied.
Touch .
Navigate to the destination folder or pane, touch anywhere in the pane or folder.
v 1.0 — August 2018
.
Altanium Neo5
. To cancel