Setting Vipa Specific Cpu Parameters - YASKAWA VIPA System MICRO Manual

Deployment CPU M13-CCF0000

Setting VIPA specific CPU parameters

Protection
4.8 Setting VIPA specific CPU parameters
Overview
80
n Level of protection
– Here 1 of 3 protection levels may be set to protect the CPU from unauthorized
access.
– Protection level 1 (default setting):
No password adjustable, no restrictions
– Protection level 2 with password:
Authorized users: read and write access
Unauthorized user: read access only
– Protection level 3:
Authorized users: read and write access
Unauthorized user: no read and write access
Except of the VIPA specific CPU parameters the CPU parametrization takes place in the
parameter dialog of the CPU 314C-2 PN/DP (314-6EH04-0AB0 V3.3) from Siemens.
After the hardware configuration of the CPU you can set the parameters of the CPU in
the virtual IO device 'VIPA MICRO PLC' . Via double-click at 'VIPA MICRO PLC M13-
CCF0000' the properties dialog is opened.
Here the following parameters may be accessed:
n Additional retentive memory
n Additional retentive timer
n Additional retentive counter
n Diagnostics interrupt DI power section supply
n Diagnostics interrupt DO power section supply
n Diagnostics interrupt DO short circuit/overload
n OB 80 for timer interrupts
n PN MultipleWrite
VIPA System MICRO
HB400 | CPU | M13-CCF0000 | en | 18-50