YASKAWA VIPA System MICRO Manual page 100

Deployment CPU M13-CCF0000
Deployment storage media - VSD, VSC
Accessing the storage
medium
100
To the following times an access takes place on a storage medium:
After overall reset
The CPU checks if a VSC is inserted. If so, the corresponding optional functions are
n
enabled.
n The CPU checks whether a project S7PROG.WLD exists. If so, it is automatically
loaded.
After PowerON
n The CPU checks whether a project AUTOLOAD.WLD exists. If so, an overall reset is
executed and the project is automatically loaded.
The CPU checks whether a command file with the name VIPA_CMD.MMC exists. If
n
so the command file is loaded and the commands are executed.
n After PowerON and CPU STOP the CPU checks if there is a *.pkb file (firmware file).
If so, this is shown by the CPU by blinking LEDs and the firmware may be installed by
Ä Chap. 4.13 'Firmware update' page 96
an update request.
In STOP state when inserting a memory card
n If a memory card is plugged in STOP state, which contains a command file
VIPA_CMD.MMC, the command file is loaded and the containing instructions are exe-
cuted.
The FC/SFC 208 ... FC/SFC 215 and FC/SFC 195 allow you to include
the memory card access into your user application. More can be found in
the manual operation list (HB00_OPL_SP7) of your CPU.
VIPA System MICRO
HB400 | CPU | M13-CCF0000 | en | 18-50