YASKAWA VIPA System MICRO Manual page 174

Deployment PG/OP communication - productive
Configure Siemens S7 connections
Connection types
Siemens S7 connection
Combination options with deployment of the FB/SFB VIPA handling blocks
Connection partner
specified in NetPro
(in the current project)
unspecified in NetPro
(in the current project)
unspecified in NetPro
(in the unknown project)
174
With this CPU exclusively Siemens S7 connection may be configured with Siemens
NetPro.
n For data transfer with Siemens S7 connections the FB/SFB VIPA handling blocks are
necessary; the deployment is described in the manual "Operation list" of your CPU.
n At Siemens S7 connections the communication connections are specified by a con-
nection ID for each communication partner.
A connection is specified by the local and partner connection end point.
n
At Siemens S7 connections the TSAPs must be congruent crosswise. The following
n
parameters define a connection end point:
The following parameters define a connection end point:
Station A
remote TSAP
local TSAP
ID A
Connection establishing
active/passive
active
passive
active/passive
à Siemens
S7 connection
ß
Connection
specified
specified
unspecified
specified (connection name in an other
project)
HB400 | CPU | M13-CCF0000 | en | 18-50
VIPA System MICRO
Station B
à local TSAP
ß remote TSAP
ID B