Profinet Diagnostics; Overview; Diagnostics With The Configuration And Engineering Tool; Diagnostics During Runtime In The User Program - YASKAWA VIPA System MICRO Manual

VIPA System MICRO

7.9 PROFINET diagnostics

7.9.1 Overview

7.9.2 Diagnostics with the configuration and engineering tool

7.9.3 Diagnostics during runtime in the user program

HB400 | CPU | M13-CCF0000 | en | 18-50
PROFINET diagnostics > Diagnostics during runtime in the user program
There are the following possibilities to get diagnostics information from your system:
Diagnostics with the configuration and engineering tool
n
n Diagnostics during runtime in the user program (OB 1, SFB 52)
n Diagnostics via OB start information
n Diagnostics status indication via SSLs
If you are connected from your configuration respectively engineering tool via Ethernet
with the PROFINET IO controller, online diagnostics information may be accessed.
E.g. with 'Station è Open online' you get information about the state of your system.
Here missing respectively faulty components are shown by symbols.
In the following figure e.g. there is shown that the configured device 3 is missing and
device 4 reports an error.
With SFB 52 RDREC (read record) you can access diagnostics data from your user pro-
gram e.g. in OB 1. The SFB 52 RDREC operates asynchronously, that is, processing
covers multiple SFB calls.
Deployment PG/OP communication - PROFINET
197