About This Manual - YASKAWA VIPA System MICRO Manual

VIPA System MICRO
Information product sup-
port
Technical support

1.2 About this manual

Objective and contents
Product
CPU M13C
Target audience
Structure of the manual
Guide to the document
Availability
Icons Headings
HB400 | CPU | M13-CCF0000 | en | 18-50
Contact your local VIPA Customer Service Organization representative if you wish to
report errors or questions regarding the contents of this document. If you are unable to
locate a customer service centre, contact VIPA as follows:
VIPA GmbH, Ohmstraße 4, 91074 Herzogenaurach, Germany
Telefax: +49 9132 744-1204
EMail: documentation@vipa.de
Contact your local VIPA Customer Service Organization representative if you encounter
problems with the product or have questions regarding the product. If you are unable to
locate a customer service centre, contact VIPA as follows:
VIPA GmbH, Ohmstraße 4, 91074 Herzogenaurach, Germany
Tel.: +49 9132 744-1150 (Hotline)
EMail: support@vipa.de
This manual describes the CPU M13-CCF0000 of the System MICRO from VIPA. It con-
tains a description of the construction, project implementation and usage.
Order number
M13-CCF0000
The manual is targeted at users who have a background in automation technology.
The manual consists of chapters. Every chapter provides a self-contained description of a
specific topic.
The following guides are available in the manual:
n An overall table of contents at the beginning of the manual
n References with page numbers
The manual is available in:
printed form, on paper
n
in electronic form as PDF-file (Adobe Acrobat Reader)
n
Important passages in the text are highlighted by following icons and headings:
DANGER!
Immediate or likely danger. Personal injury is possible.
About this manual
as of state:
CPU-HW CPU-FW
01 V2.4.12
General
9