Table of Contents
Advertisement
VIPA System MICRO
Automatic reload
Factory reset
HB400 | CPU | M13-CCF0000 | en | 18-50
If there is a project S7PROG.WLD on the memory card, after an overall reset the CPU
attempts to reload this project from the memory card. Here the yellow LED of the status
line flickers
RUN, depending on the position of the operating mode switch.
The Reset to factory setting deletes completely the internal RAM of the CPU and resets
this to delivery state. Please regard that the MPI address is also set back to default 2!
Ä Chap. 4.14 'Reset to factory settings' page 97
Overall reset > Actions after the overall reset
. The operating mode of the CPU will be STOP respectively
Deployment CPU M13-CCF0000
95
Advertisement
Table of Contents
