Safety Information - YASKAWA VIPA System MICRO Manual

General

Safety information

1.3 Safety information
Applications conforming
with specifications
Documentation
Disposal
10
CAUTION!
Damages to property is likely if these warnings are not heeded.
Supplementary information and useful tips.
The system is constructed and produced for:
n communication and process control
n general control and automation tasks
n industrial applications
n operation within the environmental conditions specified in the technical data
n installation into a cubicle
DANGER!
This device is not certified for applications in
– in explosive environments (EX-zone)
The manual must be available to all personnel in the
n project design department
n installation department
n commissioning
operation
n
CAUTION!
The following conditions must be met before using or commis-
sioning the components described in this manual:
– Hardware modifications to the process control system should only be
carried out when the system has been disconnected from power!
– Installation and hardware modifications only by properly trained per-
sonnel.
– The national rules and regulations of the respective country must be
satisfied (installation, safety, EMC ...)
National rules and regulations apply to the disposal of the unit!
VIPA System MICRO
HB400 | CPU | M13-CCF0000 | en | 18-50