Memory Management; Slot For Storage Media - YASKAWA VIPA System MICRO Manual

VIPA System MICRO
3.2.3.2 LEDs Ethernet PG/OP channel
X3/X4: LEDs
L/A
Link/Activity
green
not relevant: X

3.2.4 Memory management

General

3.2.5 Slot for storage media

Overview
HB400 | CPU | M13-CCF0000 | en | 18-50
S
Speed
yellow
X
X
X
The CPU has an integrated memory. Information about the capacity of the memory may
be found at the front of the CPU. The memory is divided into the following parts:
n Load memory 128kbyte
n Code memory (50% of the work memory)
n Data memory (50% of the work memory)
n Work memory 64kbyte
– There is the possibility to extend the work memory to its maximum capacity
128kbyte by means of a VSC.
In this slot you can insert the following storage media:
n VSD - VIPA SD-Card
– External memory card for programs and firmware.
n VSC - VIPASetCard
– External memory card (VSD) for programs and firmware with the possibility to
unlock optional functions like work memory and field bus interfaces.
– These functions can be purchased separately.
media - VSD, VSC' page 98
– To activate the corresponding card is to be installed and a Overall reset is to be
established.
To avoid malfunctions, you should use memory cards of VIPA. These cor-
respond to the industrial standard. A list of the currently available VSD
respectively VSC can be found at www.vipa.com
Description
The Ethernet PG/OP channel is physically connected to the Ethernet
interface.
There is no physical connection.
Blinking: Shows Ethernet activity.
The Ethernet interface of the Ethernet PG/OP channel has a transfer
rate of 100Mbit.
The Ethernet interface of the Ethernet PG/OP channel has a transfer
rate of 10Mbit.
Ä Chap. 4.12 'Overall reset' page 94
Hardware description
Structure > Slot for storage media
Ä Chap. 4.15 'Deployment storage
47