Pulse Width Modulation - Pwm; Properties; Wiring - YASKAWA VIPA System MICRO Manual

Deployment I/O periphery
Pulse width modulation - PWM > Wiring

5.8 Pulse width modulation - PWM

5.8.1 Properties

5.8.2 Wiring

5.8.2.1 Pulse width modulation outputs
X2: DO byte 0
146
n By presetting of time parameters, the CPU evaluates a pulse sequence with
according pulse/pause ratio and outputs it via the according output channel.
n Channel 0 and 1 are supported
Control by the user program via SFB 49
n
More information about the usage of this block may be found in the
manual "SPEED7 Operation List" from VIPA.
1 Period
2 On-delay
3 Pulse duration
4 Pulse pause
The counting function is disabled during the pulse width modulation on
the same channel.
VIPA System MICRO
HB400 | CPU | M13-CCF0000 | en | 18-50