YASKAWA VIPA System MICRO Manual page 24

Basics and mounting
Wiring > Wiring periphery module
Remove connector
24
By means of a screwdriver there is the possibility to remove the connectors e.g. for
module exchange with a fix wiring. For this each connector has indentations for unlocking
at the top. Unlocking takes place by the following proceeding:
1. Remove connector:
Insert your screwdriver from above into one of the indentations.
2. Push the screwdriver backwards:
ð The connector is unlocked and can be removed.
CAUTION!
Via wrong operation such as pressing the screwdriver down-
ward, the release lever may be damaged.
3. Plug connector:
The connector is plugged by plugging it directly into the release lever.
VIPA System MICRO
HB400 | CPU | M13-CCF0000 | en | 18-50