Table of Contents
Advertisement
Configuration with TIA Portal
TIA Portal - Hardware configuration - CPU
Setting VIPA specific CPU
parameters
262
5.
Select in the Network view the IO device 'VIPA MICRO PLC' and switch to the
Device overview.
ð In the Device overview of the PROFINET IO device 'VIPA MICRO PLC' the
CPU is already placed at slot 0. From slot 1 you can place your Extension
module.
For parametrization click at the CPU at slot 0 in the Device overview of the PROFINET IO
device 'VIPA MICRO PLC' . Then the parameters of the CPU part are shown in the Prop-
erties dialog. Here you can make your parameter settings.
specific CPU parameters' page 80
VIPA System MICRO
Ä Chap. 4.8 'Setting VIPA
HB400 | CPU | M13-CCF0000 | en | 18-50
Advertisement
Table of Contents
