Table of Contents
Advertisement
VIPA System MICRO
HB400 | CPU | M13-CCF0000 | en | 18-50
6.
Use [New] to create a new subnet and assign valid IP address data for your
PROFINET system.
With firmware version V. 2.4 and up, you can access the Ethernet
PG/OP channel via this IP address data. The configuration via an
additional CP is no longer required, but still possible.
'Hardware configuration - Ethernet PG/OP channel' page 71
7.
Click at the sub module 'PN-IO' of the CPU and open with 'Context menu
è Properties' the properties dialog.
8.
Enter at 'General' a 'Device name' . The device name must be unique at the
Ethernet subnet.
9.
Navigate in the hardware catalog to the directory 'PROFINET IO
è Additional field devices è I/O è VIPA Micro System' and connect the IO device
M13-CCF0000 to your PROFINET system.
ð In the slot overview of the PROFINET IO device 'VIPA MICRO PLC' the CPU is
already placed at slot 0.
Deployment CPU M13-CCF0000
Hardware configuration - CPU
Ä Chap. 4.6
69
Advertisement
Table of Contents
