Table of Contents
Advertisement
Deployment CPU M13-CCF0000
Hardware configuration - CPU
4.4 Hardware configuration - CPU
Precondition
Installing the IO device
VIPA MICRO PLC
Proceeding
68
n
The configuration of the CPU takes place at the 'hardware configurator' of the Sie-
mens SIMATIC Manager V 5.5 SP2 and up.
n
The configuration of the System MICRO CPU happens by means of a virtual
PROFINET IO device 'VIPA MICRO PLC' . The 'VIPA MICRO PLC' is to be installed
in the hardware catalog by means of the GSDML.
For project engineering a thorough knowledge of the Siemens SIMATIC
Manager and the Siemens hardware configurator is required!
The installation of the PROFINET IO devices 'VIPA MICRO PLC' happens in the hard-
ware catalog with the following approach:
1.
Go to the service area of www.vipa.com.
2.
Load from the download area at 'Config files è PROFINET' the according file for
your System MICRO.
3.
Extract the file into your working directory.
4.
Start the Siemens hardware configurator.
5.
Close all the projects.
6.
Select 'Options è Install new GSD file'
7.
Navigate to your working directory and install the according GSDML file.
ð After the installation according PROFINET IO device can be found at
'PROFINET IO è Additional field devices è I/O è VIPA Micro System'
In the Siemens SIMATIC Manager the following steps should be executed:
1.
Start the Siemens hardware configurator with a new project.
2.
Insert a profile rail from the hardware catalog.
3.
Place at 'Slot' number 2 the CPU 314C-2 PN/DP (314-6EH04-0AB0 V3.3).
4.
Click at the sub module 'PN-IO' of the CPU.
5.
Select 'Context menu è Insert PROFINET IO System'.
VIPA System MICRO
HB400 | CPU | M13-CCF0000 | en | 18-50
Advertisement
Table of Contents
