Table of Contents
Advertisement
VIPA System MICRO
Option: CPU replacement
in a system
HB400 | CPU | M13-CCF0000 | en | 18-50
8.
Plug again the wired connectors.
ð Now you can bring your system back into operation.
In the following the replacement of a CPU in a system is shown:
1.
If there is an extension module connected to the CPU, you have to remove it from
the CPU. For this use a screwdriver to pull the locking levers of the extension
module and CPU outwards until these engage audible.
2.
Disconnect all the modules, which are connected to the CPU by moving the CPU
along with the extension module on the mounting rail.
3.
Remove the CPU with a rotation upwards from the mounting rail.
4.
Pull the locking levers of the CPU outwards until these engage audible.
CAUTION!
It is not allowed to mount the module sideways on the mounting rail,
as otherwise the module may be damaged!
5.
For mounting pull the locking levers of the CPU outwards until these engage
audible. Plug the CPU from the top onto the mounting rail and turn the CPU down-
ward until it rests on the mounting rail.
Basics and mounting
Demounting > Demounting CPU
27
Advertisement
Table of Contents
