VIPA System MICRO
11.1.2
Work environment of the TIA Portal
Portal view
Project view
Areas of the Project view
11.2
TIA Portal - Hardware configuration - CPU
Overview
HB400 | CPU | M13-CCF0000 | en | 18-50
Basically, the TIA Portal has the following 2 views. With the button on the left below you
can switch between these views:
The 'Portal view' provides a "task oriented" view of the tools for processing your project.
Here you have direct access to the tools for a task. If necessary, a change to the Project
view takes place automatically for the selected task.
The 'Project view' is a "structured" view to all constituent parts of your project.
The Project view is divided into the following areas:
1
Menu bar with toolbars
2
Project tree with Details view
3
Project area
4
Device overview of the project respectively area for block programming
5
Properties dialog of a device (parameter) respectively information area
6
Hardware catalog and tools
7
"Task-Cards" to select hardware catalog, tasks and libraries
8
Jump to Portal or Project view
The hardware configuration of the CPU happens in the Siemens TIA Portal by means of a
virtual PROFINET IO device. For the PROFINET interface is standardized software sided,
the functionality is guaranteed by including a GSDML file into the Siemens TIA Portal.
The hardware configuration of the CPU is divided into the following parts:
n
Installation GSDML 'VIPA MICRO PLC' for PROFINET
n
Configuration Siemens CPU
n
Connection 'VIPA MICRO PLC' as PROFINET IO device
Configuration with TIA Portal
TIA Portal - Hardware configuration - CPU
259