VIPA System MICRO
3.3 Option: Extension module EM M09 2x serial interface
EM M09
X1 PtP (RS422/485)
HB400 | CPU | M13-CCF0000 | en | 18-50
Please note that the interface X2 MPI(PB) does not provide DC 24V,
which is necessary for some programming adapters!
9pin SubD jack (isolated):
Using the PtP functionality the RS485 interface is allowed to connect via serial point to
point connection to different source res. target systems.
n
Protocols:
–
ASCII
–
STX/ETX
–
3964R
–
USS
–
Modbus master (ASCII, RTU)
n
Serial bus connection
–
Full-duplex Four-wire operation (RS422)
–
Half-duplex Two-wire operation (RS485)
–
Data transfer rate: max. 115 kBaud
Ä Chap. 8 'Option: PtP communication' page 202
Option: Extension module EM M09 2x serial interface
Hardware description
49