Configuration With Tia Portal; Tia Portal - Work Environment; General - YASKAWA VIPA System MICRO Manual

Configuration with TIA Portal

TIA Portal - Work environment > General
11 Configuration with TIA Portal
11.1

TIA Portal - Work environment

11.1.1

General

General
Starting the TIA Portal
Exiting the TIA Portal
258
In this chapter the project engineering of the VIPA CPU in the Siemens TIA Portal is
shown. Here only the basic usage of the Siemens TIA Portal together with a VIPA CPU is
shown. Please note that software changes can not always be considered and it may thus
be deviations to the description. TIA means Totally integrated Automation from Siemens.
Here your VIPA PLCs may be configured and linked. For diagnostics online tools are
available.
Information about the Siemens TIA Portal can be found in the online help
respectively in the according online documentation.
To start the Siemens TIA Portal with Windows select 'Start è Programs
è Siemens Automation è TIA ...'
Then the TIA Portal opens with the last settings used.
With the menu 'Project è Exit' in the 'Project view' you may exit the TIA Portal. Here
there is the possibility to save changes of your project before.
VIPA System MICRO
HB400 | CPU | M13-CCF0000 | en | 18-50