YASKAWA VIPA System MICRO Manual page 236

Configuration with VIPA SPEED7 Studio
Deployment I/O periphery > Analog input
10.6.2.2 Parametrization in SPEED7 Studio
10.6.2.2.1 'I/O addresses'
Sub module Input address
AI2 800
802
10.6.2.2.2 'Parameter'
'Filtering channel 0/1'
236
Access
WORD
WORD
The analog input part has a filter integrated. The parametrization of the filter happens via
the parameter 'Filter channel 0/1' . The default value of the filter is 1000ms. The following
values can be entered:
n 2ms: no filter
n 100ms: small filter
n 1000ms: medium filter
n 10000ms: maximum filter
Assignment
Analog input channel 0 (X4)
Analog input channel 1 (X4)
HB400 | CPU | M13-CCF0000 | en | 18-50
VIPA System MICRO