Table of Contents
Advertisement
VIPA System MICRO
5.9 Pulse train
5.9.1 Properties
HB400 | CPU | M13-CCF0000 | en | 18-50
n
By presetting of time parameters, the CPU evaluates a pulse sequence with
according pulse/pause ratio and outputs it via the according output channel.
n
The output is as a pulse-direction command (P/D).
–
Output frequency pattern via pulse train channel
–
To output the direction, an additional output is to be used, which is to be con-
trolled via your user program.
n
Channel 0 and 1 are supported
n
Control by the user program via SFB 49
More information about the usage of this block may be found in the
manual "SPEED7 Operation List" from VIPA.
1
Number of pulses
2
Period duration
3
Pulse duration
4
Pulse pause
The counting function is disabled during the pulse train output on the
same channel.
Deployment I/O periphery
Pulse train > Properties
151
Advertisement
Table of Contents
