Table of Contents
Advertisement
VIPA System MICRO
Link
4.10.1.2
Web page with selected module
Tab: 'Info'
Tab: 'Data'
Tab: 'Parameter'
4.10.2
WebVisu project
HB400 | CPU | M13-CCF0000 | en | 18-50
n
Subscribed strings: Number of strings or character chains.
–
free: Here nothing is shown.
–
used: Number of strings used.
–
max.: Here nothing is shown.
n
WebVisu Project: Information on the memory allocation for the WebVisu project.
–
free: Still free space for the WebVisu project.
–
used: Size of the current WebVisu project.
–
max.: Maximum available space for a WebVisu project.
In Status 'running' the links to access your WebVisu are listed here.
Here product name, order number, serial number, firmware version and hardware state
number of the according module are listed.
Here the address and the state of the inputs respectively outputs are listed. Please note
with the outputs that here exclusively the states of outputs can be shown, which are
within the OB 1 process image.
With parametrizable modules e.g. analog modules the parameter setting is shown here.
These come from the hardware configuration.
n
With a WebVisu project there is the possibility to configure a web visualization on your
CPU.
n
The configuration of a WebVisu project is only possible with the SPEED7 Studio V 1.7
and up.
Since a WebVisu project is only executable by memory card, a memory card of VIPA
n
(VSD, VSC) must be plugged.
Ä Chap. 4.15 'Deployment storage media - VSD, VSC' page 98
n
The WebVisu functionality must be activated in the CPU.
Ä Chap. 10.7.1 'Activate WebVisu functionality' page 249
When the project is transferred from the SPEED7 Studio, the WebVisu project is auto-
n
matically transferred to the inserted memory card.
Deployment CPU M13-CCF0000
Accessing the web server > WebVisu project
89
Advertisement
Table of Contents
