Table of Contents
Advertisement
Configuration with TIA Portal
TIA Portal - Hardware configuration - CPU
Installation GSDML CPU
for PROFINET
Configuration CPU
260
The installation of the PROFINET IO devices 'VIPA MICRO PLC' happens in the hard-
ware catalog with the following approach:
1.
Go to the service area of www.vipa.com.
2.
Load from the download area at 'Config files è PROFINET' the according file for
your System MICRO.
3.
Extract the file into your working directory.
4.
Start the Siemens TIA Portal.
5.
Close all the projects.
6.
Switch to the Project view.
7.
Select 'Options è Install general station description file (GSD)'.
8.
Navigate to your working directory and install the according GSDML file.
ð After the installation the hardware catalog is refreshed and the Siemens TIA
Portal is finished.
After restarting the Siemens TIA Portal the according PROFINET IO device can
be found at Other field devices > PROFINET > IO > VIPA GmbH > VIPA Micro
System.
Thus, the VIPA components can be displayed, you have to deactivate the
"Filter" of the hardware catalog.
With the Siemens TIA Portal, the CPU from VIPA is to be configured as CPU 314C-2
PN/DP (314-6EH04-0AB0 V3.3) from Siemens.
1.
Start the Siemens TIA Portal.
2.
Create a new project in the Portal view with 'Create new project' .
3.
Switch to the Project view.
4.
Click in the Project tree at 'Add new device' .
5.
Select the following CPU in the input dialog:
SIMATIC S7-300 > CPU 314C-2 PN/DP (314-6EH04-0AB0 V3.3)
ð The CPU is inserted with a profile rail.
VIPA System MICRO
HB400 | CPU | M13-CCF0000 | en | 18-50
Advertisement
Table of Contents
