Table of Contents
Advertisement
VIPA System MICRO
Parametrization
Parametrization during
runtime
10.6
Deployment I/O periphery
10.6.1
Overview
Project engineering and
parametrization
10.6.2
Analog input
10.6.2.1
Overview
HB400 | CPU | M13-CCF0000 | en | 18-50
For parametrization double-click in the 'Device configuration' on the module you want to
parametrize. Then the parameters of the module are shown in a dialog. Here you can
make your parameter settings.
By using the SFCs 55, 56 and 57 you may alter and transfer parameters for wanted
modules during runtime. For this you have to store the module specific parameters in so
called "record sets". More detailed information about the structure of the record sets is to
find in the according module description.
n
On this CPU the connectors for digital respectively analog signal and Technological
functions are combined in a one casing.
n
Die Project engineering happens in the VIPA SPEED7 Studio as CPU M13-CCF0000.
n
For parametrization of the digital I/O periphery and the technological functions the
corresponding sub modules of the CPUM13-CCF0000 are to be used.
The controlling of the operating modes of the technological functions happens by
n
means of handling blocks of the user program.
n
2xUx12Bit (0 ... 10V)
n
Sub module 'AI2'
Ä Chap. 5.3 'Analog input' page 108
n
Configuration with VIPA SPEED7 Studio
Deployment I/O periphery > Analog input
235
Advertisement
Table of Contents
