Related Parameters - YASKAWA SI-P3 Installation Manual

6 Related Parameters

6 Related Parameters
The parameters in Table 8
of all parameters in
packaged with the drive for details on setting parameters.
No.
(Addr. Hex)
b1-01
Reference 1 Source
(180)
<1>
b1-02
(181) Run Command 1 Source
<1>
d5-01
Torque Control Selection
(29A)
F6-01
Communication Error
(3A2)
Selection
<2>
F6-02 Comm External Fault (EF0)
(3A3) Detect
F6-03 Comm External Fault (EF0)
(3A4) Select
F6-06
Torque Reference/Limit by
(3A7)
Comm
<6>
34
set the drive for operation with the option. Confirm proper setting
Table 8 before starting network communications. Refer to the manual
Table 8 Related Parameters
Name
Selects the input method for frequency reference.
0: Keypad
1: Analog Input
2: Memobus/Modbus Communications
3: Option PCB
4: Pulse Train Input
Selects the input method for the Run command.
0: Keypad
1: Digital Input
2: Memobus/Modbus Communications
3: Option PCB
0: Speed Control
1: Torque Control
Selects drive response when a bUS error is detected
during communications with the option.
0: Ramp to Stop
1: Coast to Stop
2: Fast Stop (Use C1-09)
3: Alarm Only
4: Alarm - Run at d1-04
5: Alarm - Ramp to Stop
Selects the condition for external fault detection
(EF0).
0: Always detected
1: Detection during run only
Selects drive response for external fault input (EF0)
detection during option communications.
0: Ramp to Stop
1: Coast to Stop
2: Fast Stop (Use C1-09)
3: Alarm Only
Enabling this parameter allows d5-01 to determine
whether the value is read as the Torque Limit value
(d5-01 = 0) or the Torque Reference value (d5-01 =
1).
0: Disabled
1: Enabled
YASKAWA ELECTRIC TOBP C730600 82B YASKAWA AC Drive Option SI-P3 Installation Manual
Description
<2>
<3> <4>
<3> <4>
<2>
<7>
Values
Default: 1
Range: 0 to 4
(Set to 3)
Default: 1
Range: 0 to 3
(Set to 3)
Default: 0
Range: 0, 1
Default: 1
Range: 0 to 5
<3>
Default: 0
Range: 0, 1
Default: 1
Range: 0 to 3
Default: 0
Range: 0, 1