Proceeding; Parametrization - YASKAWA VIPA System MICRO Manual

Deployment I/O periphery
Frequency measurement > Parametrization

5.7.3 Proceeding

Hardware configuration
User program

5.7.4 Parametrization

5.7.4.1 Address assignment
Sub module Input
address
Counter 816
820
824
828
Sub module Output
address
Counter 816
820
824
828
142
In the Siemens SIMATIC Manager the following steps should be executed:
1. Perform a hardware configuration for the CPU.
tion - CPU' page 68
2. Double-click the counter sub module of the CPU 314C-2 PN/DP (314-6EH04-0AB0
V3.3).
ð The dialog 'Properties' is opened.
3. As soon as you select the operating mode for the corresponding channel, a dialog
box with default values for this counter mode is created and shown. Select for the
corresponding channel the operating mode 'Frequency counting' .
4. Perform the required parameter settings.
5. Safe your project with 'Station è Safe and compile'.
6. Transfer your project to your CPU.
n The SFB 48 should cyclically be called (e.g. OB 1) for controlling the frequency meas-
urement.
n The SFB is to be called with the corresponding instance DB. Here the parameters of
the SFB are stored.
Access Description
DINT Channel 0: Frequency value
DINT Channel 1: Frequency value
DINT Channel 2: Frequency value
DINT Channel 3: Frequency value
Access Description
DWORD reserved
DWORD reserved
DWORD reserved
DWORD reserved
VIPA System MICRO
Ä Chap. 4.4 'Hardware configura-
HB400 | CPU | M13-CCF0000 | en | 18-50