Table of Contents
Advertisement
Configuration with VIPA SPEED7 Studio
SPEED7 Studio - Hardware configuration - Ethernet PG/OP channel
10.4
SPEED7 Studio - Hardware configuration - Ethernet PG/OP channel
Overview
Assembly and commis-
sioning
"Initialization"
232
The CPU has an integrated Ethernet PG/OP channel. This channel allows you to pro-
gram and remote control your CPU.
n
The Ethernet PG/OP channel (X3/X4) is designed as switch. This enables PG/OP
communication via the connections X3 and X4.
n
Configurable connections are possible.
DHCP respectively the assignment of the network configuration with a DHCP server
n
is supported.
n
Default diagnostics addresses: 2025 ... 2040
n
At the first commissioning respectively after a factory reset the Ethernet PG/OP
channel has no IP address. For online access to the CPU via the Ethernet PG/OP
channel, valid IP address parameters have to be assigned to this by means of your
configuration tool. This is called "initialization".
n
Via the Ethernet PG/OP channel, you have access to:
–
Device website, where you can find information on firmware status, connected
peripherals, current cycle times, etc.
–
WebVisu project, which is to be created in the SPEED7 Studio.
–
PROFINET IO controller or the PROFINET I-Device.
1.
Install your System MICRO with your CPU.
2.
Wire the system by connecting cables for voltage supply and signals.
3.
Connect the one of the Ethernet jacks (X3, X4) of the Ethernet PG/OP channel to
Ethernet.
4.
Switch on the power supply.
ð After a short boot time the CP is ready for communication. He possibly has no
IP address data and requires an initialization.
You get valid IP address parameters from your system administrator. The assignment of
the IP address data happens online in the SPEED7 Studio with the following proceeding:
1.
Ethernet PG/OP
Determine the current Ethernet (MAC) address of your Ethernet PG/OP channel.
This can be found at the front of the CPU labelled as "MAC PG/OP: ...".
2.
Start the SPEED7 Studio with your project.
VIPA System MICRO
HB400 | CPU | M13-CCF0000 | en | 18-50
Advertisement
Table of Contents
