Table of Contents
Advertisement
Hardware description
Option: Extension module EM M09 2x serial interface
X2 MPI(PB)
LEDs
50
9pin SubD jack (isolated):
The interface supports the following functions, which are switch able:
MPI (default / after overall reset)
n
The MPI interface serves for the connection between programming unit and CPU. By
means of this the project engineering and programming happens. In addition MPI
serves for communication between several CPUs or between HMIs and CPU.
Standard setting is MPI address 2.
n
PROFIBUS DP slave (optional)
The PROFIBUS slave functionality of this interface can be activated by configuring
the sub module 'MPI/DP' of the CPU in the hardware configuration.
'Option: Deployment PROFIBUS communication' page 216
To switch the interface X2 MPI(PB) to PROFIBUS functionality you have
to activate the according bus functionality by means of a VSC storage
media from VIPA. By plugging the VSC storage card and then an overall
reset the according functionality is activated.
storage media - VSD, VSC' page 98
X1 PtP
Description
TxD
Send activity
green flickers
No send activity
X2 MPI(PB)
Description
DE
green
n
n
n
n
green flashes
n
n
n
Power supply Expansion module EM M09 available
Slave is in DE (data exchange)
Slave exchanges data with the master
Slave is in RUN state
LED flashes at PowerON of EM M09
No power supply EM M09 available
Slave has no configuration
HB400 | CPU | M13-CCF0000 | en | 18-50
VIPA System MICRO
Ä Chap. 9
Ä Chap. 4.15 'Deployment
Advertisement
Table of Contents
