Addressing; Overview; Default Address Assignment Of The I/O Part - YASKAWA VIPA System MICRO Manual

Deployment CPU M13-CCF0000
Addressing > Default address assignment of the I/O part

4.3 Addressing

4.3.1 Overview

4.3.2 Default address assignment of the I/O part

Sub module Input
address
AI5/AO2 800
802
Sub module Input
address
DI24/DO16 136
137
Sub module Input
address
Counter 816
820
824
828
Sub module Output
address
DI24/DO16 136
137
Sub module Output
address
Counter 816
820
824
828
66
To provide specific addressing of the installed peripheral modules, certain addresses
must be allocated in the CPU. This address mapping is in the CPU as hardware configu-
ration. If there is no hardware configuration, depending on the slot, the CPU assigns
automatically peripheral addresses for digital in-/output modules starting with 0 and
analog modules are assigned to even addresses starting with 256.
Access Assignment
WORD Analog input channel 0 (X6)
WORD Analog input channel 1 (X6)
Access Description
BYTE Digital input I+0.0 ... I+0.7 (X1)
BYTE Digital input I+1.0 ... I+1.7 (X5)
Access Description
DINT Channel 0: Counter value / Frequency value
DINT Channel 1: Counter value / Frequency value
DINT Channel 2: Counter value / Frequency value
DINT Channel 3: Counter value / Frequency value
Access Description
BYTE Digital output Q+0.0 ... Q+0.7 (X2)
BYTE Digital output Q+1.0 ... Q+1.3 (X6)
Access Description
DWORD reserved
DWORD reserved
DWORD reserved
DWORD reserved
VIPA System MICRO
HB400 | CPU | M13-CCF0000 | en | 18-50