Connecting Service Interface And Profinet - Siemens SINAMICS S210 Operating Instructions Manual

5.4.6.2

Connecting service interface and PROFINET

Connect your commissioning device using an Ethernet cable to
the service interface (socket X127).
The transmission rates are 10 Mbit/s or 100 Mbit/s.
Connect the converter with PROFINET cables with RJ45 FastConnect connectors or with
PROFINET patch cables (see accessories) via the sockets X150 P1 and X150 P2 to the
PROFINET network.
Table 5-8
Permissible cable length for PROFINET (terminals X150 P1 and X150 P2): 100 m
Permissible cable length for the service interface (terminal X127): 10 m
SINAMICS S210 servo drive system
Operating Instructions, 01/2019, A5E41702836B AC
Pin assignment for X127, X150 P1 and X150 P2
Pin Pin assignment
1 RXP
2 RXN
3 TXP
4 Reserved
5 Reserved
6 TXN
7 Reserved
8 Reserved
5.4 Connecting the converter and the motor
Explanation
Receiving data +
Receiving data -
Sending data +
Sending data -
Installing
173