Spare Parts; Connector Set For Converters With 1 Ac Line Connection - 6Sl3260-2Db00-0Aa0 - Siemens SINAMICS S210 Operating Instructions Manual

Servo drive system, converter, servomotor
Hide thumbs Also See for SINAMICS S210:
Table of Contents

Advertisement

13.5

Spare parts

Spare parts for the converter
The following components are available as spare parts for the converter:
● Connector set for converters with 1 AC line connection6SL3260-2DB00-0AA0
● Connector set for converters with 3 AC line connection6SL3260-2DB10-0AA0
● Siemens IX connector for the encoder connection
for converters with 1 AC / 3 AC line connection
● Fan for converters with 3 AC line connection, FSA
● Fan for converters with 3 AC line connection, FSB
● Fan for converters with 3 AC line connection, FSC
13.5.1

Connector set for converters with 1 AC line connection - 6SL3260-2DB00-0AA0

Under this article number, you will receive a spare parts package for the frame sizes FSA, FSB
and FSC with the following content:
● Connectors
– X1: Connector for the line connection and the external braking resistor (jumper for
– X2: Connector for the motor connection
– X107: Connector for the motor holding brake
– X124: Connector for the external 24 V DC power supply
– X130: Connector for the digital inputs
● Shield plate for FSA, FSB and FSC
X1: Connector for the line connection and the external braking resistor
Weidmüller: BLF 5.08HC/05/180F SN BK BX, article number 1012670000
As daisy chain: BLDF 5.08/05/180F SN BK BX, article number 1000970000
The terminals are spring-loaded terminals.
SINAMICS S210 servo drive system
Operating Instructions, 01/2019, A5E41702836B AC
internal braking resistor is included)
Pin
Pin assignment
L1
Phase L1 line system
N
Neutral conductor
DCP
Braking resistor, external
Braking resistor, internal
R2
Internal braking resistor
R1
External braking resistor
6FX2003-0DE01
6SL3260-0AA00-0AA0
6SL3260-0AB00-0AA0
6SL3260-0AC00-0AA0
Explanation
If you are using the internal braking resistor, DCP
and R2 must be jumpered.
If you are using the external braking resistor, remove
the jumper between DCP and R2.
Connect the external braking resistor via the DCP
and R1 terminals.
Ordering data
13.5 Spare parts
343

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simotics s-1fk2

Table of Contents