Saving Data In A Non-Volatile Fashion - Siemens SINAMICS S210 Operating Instructions Manual

6.1.7.4

Saving data in a non-volatile fashion

The changed settings are only saved in the volatile memory of the converter. They are lost
when you switch off the drive or close the Web server.
For this reason, it is important that the changes are regularly stored in a power-independent
manner (also known as "Copy RAM to ROM"). You can either save the setting for each
individual commissioning step or save all the settings made and the tuning results at the end of
the commissioning.
1. To save powerfail-proof, click
A save prompt appears:
Figure 6-10
2. Click "Save" to save the data permanently.
Note:
Note
Operation with memory card
If a memory card in inserted in the converter, the settings are then not only saved powerfail-
proof in the converter, but are also saved on the memory card. This allows you to easily replace
the converter in a spare part scenario.
SINAMICS S210 servo drive system
Operating Instructions, 01/2019, A5E41702836B AC
Permanent saving prompt
Replacing the converter with memory card (Page 274)
Commissioning and diagnostics using the web server
in the footer of the Web server.
6.1 Fundamentals
193