Siemens SINAMICS S210 Operating Instructions Manual page 246

Commissioning and diagnostics using the web server
6.6 System settings in the web server
4. Click "Apply Settings" to save the changes in the RAM of the device.
5. Click
You have configured the IP connection.
❒
Note
Switchover from HTTP to HTTPS
If you were logged-in via HTTP, then after activating option "Only use HTTPS connection", you
will be logged-out. To log in again, you must set a secure HTTPS connection (https://...) to the
converter.
Note
Certificates for the secure data transfer
To secure an HTTPS connection, it requires security certificates for the encryption of the
access. Detailed information on working with these security certificates can be found in Chapter
"Certificates for the secure data transfer (Page 554)".
244
to save the data permanently.
SINAMICS S210 servo drive system
Operating Instructions, 01/2019, A5E41702836B AC