Siemens SINAMICS S210 Operating Instructions Manual page 160

Installing
5.4 Connecting the converter and the motor
Connections and operating elements of the converter with 3 AC line connection
Connectors X1 standard, X2, X4, X107, X124 and X130 are included in the scope of delivery
of the converter.
Encoder connector X100 is included with the OCC cable.
You require Ethernet cables with RJ45 connectors to connect service interface X127 - as well
as for PROFINET ports X150 P1 and X150 P2.
You must separately order the connectors for line supply cabling X1 and for DC link cabling X3
as required.
158
Connectors and cables for line and DC link cabling (Page 340)
SINAMICS S210 servo drive system
Operating Instructions, 01/2019, A5E41702836B AC