Siemens SINAMICS S210 Operating Instructions Manual page 253

Use the Trial License
Procedure:
1. Select "System > Licenses" in the navigation.
2. Click "Activate Trial License Mode".
3. .Acknowledge the confirmation prompt
Message A13030 indicates that the Trial License has been activated.
❒
After the Trial License has expired, alarm A13031 "Trial License Period expired" is output.
Repeat steps 1 and 3 if you want to activate the Trial License for another trial period.
License key
You can view the current license key on the license overview page of the web server and enter
a new key as required.
1. Select "System > Licenses" in the navigation.
2. In the license overview page, click on "Display/enter license key".
The current license key of your drive is visible in the upper field of the following dialog (if
already present).
3. To use a new license key, enter it in the "New License Key" field (example: E1MQ-4BEA).
This allows you to replace a Trial License with a full license.
4. Click on "Activate" to activate the license key that has just been entered.
The dialog closes. The new license key becomes active the next time that the system runs-
up.
SINAMICS S210 servo drive system
Operating Instructions, 01/2019, A5E41702836B AC
Commissioning and diagnostics using the web server
6.6 System settings in the web server
251