Technical Specifications; Technical Data And Properties Of The Motor; Technical Features - Siemens SINAMICS S210 Operating Instructions Manual

Technical specifications

10.1

Technical data and properties of the motor

10.1.1

Technical features

Property
Type of motor
Rotor inertia
Cooling
Insulation of the stator winding according
to EN 60034-1
(IEC 60034-1)
Pulse voltage insulation class according to
EN 60034-18-41 (IEC 60034-18-41)
Operating range
Installation altitude (according to EN
60034–1 and IEC 60034–1)
Type of construction according to
EN 60034-7 (IEC 60034-7)
Degree of protection according to
EN 60034-5 (IEC 60034-5)
Temperature monitoring
Paint finish
Shaft extension according to DIN 748-3
(IEC 60072-1)
Radial eccentricity, concentricity, and ax‐
ial eccentricity according to DIN 42955
(IEC 60072–1)
1)
Vibration severity grade according to EN
60034-14
(IEC 60034-14)
Sound pressure level L
pA
to DIN EN ISO 1680, max. tolerance
+ 3 dB(A)
Encoder systems, built-in with DRIVE-
CLiQ interface
SINAMICS S210 servo drive system
Operating Instructions, 01/2019, A5E41702836B AC
Version
Permanent-magnet synchronous motor
1FK21 - High Dynamic - motor with low rotor inertia
1FK22 - Compact - motor with average rotor inertia
Natural cooling
1FK2☐02, 1FK2☐03:
Temperature class 130 (B) for a winding temperature of ΔT = 80 K at an ambient
temperature of +40 °C
1FK2☐04, 1FK2☐05, 1FK2☐06, 1FK2☐08, 1FK2☐10:
Temperature class 155 (F) for a winding temperature of ΔT = 100 K at an ambient
temperature of +40 °C
IVIC: C
-15 to +40 °C, derating at higher temperatures
≤ 1000 m above sea level, otherwise power derating
IM B5 (IM V1, IM V3)
IP64, optional IP65
Thermal motor model
Anthracite (RAL 7016)
Plain shaft, optionally with feather key and half-key balancing,
Tolerance N (normal)
Grade A is maintained up to rated speed
(1 m) according 55 dB(A)
● AS22DQC, absolute encoder singleturn 22 bit (code letter: S)
● AM22DQC, absolute encoder 22 bit + 12 bit multiturn (code letter: M)
10
279