Changing The Parameter Value; Filtering The Parameter List - Siemens SINAMICS S210 Operating Instructions Manual

6.2.7.2

Changing the parameter value

You can change the parameter values of the parameters that can be written to (p parameters)
in the parameter list.
To do this, you have one of the following options:
1. Overwrite the current parameter value with the new value.
2. Select a value via the drop-down list.
Invalid values will be rejected.
Click
6.2.7.3

Filtering the parameter list

You can set filters in the parameter list of the Web server and therefore limit the display of the
parameters. You can make the filter settings via a filter bar above the parameter list. The filter
settings can be combined.
Figure 6-20
Setting the filters of the parameter list
1. In the "Search" field, enter a search term (any number of characters) for which you want to
search in the parameter list, e.g. "Current".
The search term is applied to the "ID" (only in the advanced view) and "Parameter" columns
in the parameter list.
2. Select a group from the "Parameter Group" drop-down list.
– All groups
– My groups (configured by the user)
– Specific groups, such as motor parameters
3. In the "Parameter Types" drop-down list, select whether adjustable parameters ("Editable"),
display parameters ("Write protected") - or both are to be displayed in the parameter list.
The parameter list is limited further after every further filter setting (the filters are linked via an
AND operation). The filters can be set in any order.
Note
Collapsing the filter bar
The filter bar is opened per default. To collapse the filter bar, click the
and Filters".
SINAMICS S210 servo drive system
Operating Instructions, 01/2019, A5E41702836B AC
to save the data permanently.
Filter bar of the parameter list
Commissioning and diagnostics using the web server
6.2 Commissioning using the web server
arrow next to "Search
209