System Settings In The Web Server; Settings; Setting Or Changing User Accounts - Siemens SINAMICS S210 Operating Instructions Manual

Commissioning and diagnostics using the web server

6.6 System settings in the web server

6.6 System settings in the web server
6.6.1

Settings

6.6.1.1

Setting or changing user accounts

For SINAMICS S210, both user accounts - "SINAMICS" and "Administrator" - are permanently
defined, and cannot be changed by users.
You can make the following settings in the user accounts:
● Changing the Administrator password
● Authorize or inhibit "SINAMICS" user
● Defining a new password for the "SINAMICS" user
● Changing/deleting the password for the "SINAMICS" user
Password requirements
To protect against unauthorized access, by an attacker, for example, generate a secure
password that consists of:
● At least 8 characters
● Uppercase and lowercase letters
● Numbers and special characters (e.g.: ?!%+ ...)
● Different passwords for different types of access (administrator / user)
Checking the password
The length of the password is checked by the converter. There is no check for uppercase and
lowercase letters and special characters!
Remember the passwords or store the passwords in a safe place that cannot be accessed by
unauthorized persons.
240
SINAMICS S210 servo drive system
Operating Instructions, 01/2019, A5E41702836B AC