Siemens SINAMICS S210 Operating Instructions Manual page 419

r60122 PROFIdrive SIC/SCC telegram selection
Data type: Unsigned16
Description: Displays the telegram for the Safety Information Channel (SIC) / Safety Control Channel (SCC).
The telegram settings are taken from the higher-level control system.
Value: 700:
701:
999:
r61000[0...239] PROFINET Name of Station
Data type: Unsigned8
Description: Displays PROFINET Name of Station.
r61001[0...3] PROFINET IP of Station
Data type: Unsigned8
Description: Displays PROFINET IP of Station.
SINAMICS S210 servo drive system
Operating Instructions, 01/2019, A5E41702836B AC
Unit: -
Supplementary telegram 700, PZD-0/3
Supplementary telegram 701, PZD-2/5
No telegram
Unit: -
Unit: -
Parameters
14.2 List of parameters
417