Isuzu N Series 2008 Owner's Manual page 549

Replacing Clearance Lights, Turn Signal Lights, and
2008N_sec08_print2.indd 29
IN CASE OF EMERGENCY
Cornering Lights
Replacing a Clearance Light
(NLR/NNR/NPR/NQR/NPS Models)
1. Refer to "Replacing the Headlights"
and remove the headlight assembly.
Replacing the Headlights
2. Pull the bulb out from the clearance
light socket and replace with a new
one.
3. To install the lights, perform the same
sequence of operations in reverse
taking care of the following points:
• Turn the connector clockwise to lock
it securely.
• If the socket is not locked securely,
water could get inside the light and
lead to a breakdown.
→ Refer to page 8-25
ADVICE
8-29
4/09/2008 8:14:28 AM