Isuzu N Series 2008 Owner's Manual page 254

4-126
CONTROLS AND INSTRUMENTS
CAUTION
• Driving in 4WD mode on dry, well-paved roads can accelerate wearing of the
front tyres and reduce fuel efficiency. As this action can also increase vehicle
noise levels and lead to drive system damage, 2WD should always be used
under these driving conditions.
• Whenever driving in 4WD mode, confirm that the knobs on the freewheel hubs
are set to the "LOCK" position.
• Do not press the 4WD switch when driving with the knobs on the freewheel
hubs in the "FREE" position. Doing so could cause the transfer case to fail.
Guidelines for 2WD to 4WD Switching
Drive mode
2WD
4WD
2008N_sec04-2_print2.indd 126
4WD Switch
4WD indicator
4WD switch
Use the 4WD switch to select 2WD or
4WD.
When using the switch, confirm in advance
that the knobs on the freewheel hubs are
in the "LOCK" position, and set the switch
only when the vehicle is stopped or moving
at low speed.
Usage conditions
light
During normal driving on an
Off
ordinary road or highway.
When driving on snow-covered,
icy, steep or other roads that
cannot easily be negotiated with
2WD.
On
3/09/2008 5:32:01 PM