Isuzu N Series 2008 Owner's Manual page 192

4-64
CONTROLS AND INSTRUMENTS
Name
Headlight
Clearance light
Taillight
License plate light
Illumination light control
Rear fog light
V
2008N_sec04-1_print2.indd 64
Combination Light Control Switch
Light Control Switch
OFF
Turning the light control switch to the
position indicated in the table causes the
relevant lights to illuminate.
ADVICE
• The light control switch can be used
when the starter switch is placed in
the "LOCK" or "ACC" position. Do
not operate the combination lights
for an extended time period with
the engine stopped. Otherwise,
the battery may go dead, making it
impossible to restart the engine.
Position
OFF
ON
ON
OFF OFF
Switching between High Beam and
Low Beam
With the headlights on, move the lever
forward and backward to switch between
the high beam and low beam.
Moving the lever forward selects high
beam; moving the lever backward selects
low beam.
While the headlights are on high beam, the
high beam indicator light on the instrument
panel remains on.
ON
3/09/2008 5:28:55 PM