Isuzu N Series 2008 Owner's Manual page 239

Cruise control main switch
Cruise control cancel switch
2008N_sec04-2_print2.indd 111
CONTROLS AND INSTRUMENTS
When Canceling Cruise Control
Press the cruise control main switch again
to set it to "OFF". The cruise control main
indicator light will go out.
The cruise control is canceled in the
following cases.
• When the brake pedal is depressed.
• When depressing the clutch pedal
(manual transmission model).
• When applying the exhaust brake.
• When the vehicle speed decreases to
approx. 40 km/h (25 MPH) or less.
• When there is an abnormality in the
engine control system.
• When the vehicle speed decreases
approx. 40 km/h (25 MPH) or more
from the set vehicle speed.
• When shifting gears.
• When operating the cruise control
cancel switch.
ADVICE
• When you do not use the cruise
control, be sure to place the cruise
control main switch into "OFF".
• When you place the starter switch
into "ACC", place the cruise control
main switch into "OFF" then reset
the cruise control.
NOTE
• A AMT model may automatically
shift during the auto mode operation.
This does not cancel cruise control.
4-111
3/09/2008 5:31:54 PM