Isuzu N Series 2008 Owner's Manual page 181

Hide thumbs Also See for N Series 2008:
Table of Contents

Advertisement

CAUTION
If the ASR indicator light comes on amber while driving without operation of
the ASR OFF switch, pull off to a safe place well clear of traffic and take the
following actions.
-
Stop the engine.
-
Turn the starter switch to the "ON" position. The system is normal if the
indicator light comes on first amber and then green before it goes out 2
seconds later. The ASR is operating satisfactorily.
If the indicator light does not go out, or comes on repeatedly, have the vehicle
inspected/serviced at the nearest Isuzu Dealer as soon as possible.
2008N_sec04-1_print2.indd 53
CONTROLS AND INSTRUMENTS
ASR Indicator Light
Glow Plug Indicator Light
Warm-up System Indicator Light
V
When the starter switch is turned to the
"ON" position, the indicator light should
come on and change color from amber to
green before it goes out 2 seconds later.
This indicator light stays on green while
the anti-slip regulator (ASR) is in operation.
This indicator light comes on amber if there
is a problem with the ASR or when you
disengage the ASR using the ASR OFF
switch.
Anti-Slip Regulator (ASR)
→ Refer to page 4-120
This indicator light comes on when
the starter switch is turned to the "ON"
position and goes out when preheating is
completed. When the indicator light has
gone out, the engine may be started.
Starting the Engine → Refer to page 4-4
This indicator light comes on when the
warm-up switch is pressed. While this
indicator is on, the engine is warmed up.
Warm-Up Switch
V
→ Refer to page 4-63
4-53
V
V
3/09/2008 5:28:47 PM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents